MED 520 ULTIMATE - pharmaqatar

MED 520 ULTIMATE

12,656.95USD

Clear

MED 520 ULTIMATE

PRO-ACTIVE-Control: Permanent, proactive monitoring of
the performance data and alerts in the case of deviations
– so that you can take countermeasures in good time
before a fault threatens your chilled goods; world´s most
accurate temperature control in refrigerated areas thanks
to two standard PT-1000 sensors.
Touch-Display, elegant glass design, capacitive.
Access control with protocol.
Graphical display of the temperature curve and min/max
temperature
External housing made from galvanised sheet steel
(rustproof), with white, anti-scratch powder coating.
Length of the plug cable: approx. 3 m.
Equipped with castors.
Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
Interior consists of twelve drawers with stops, on roller
runners. There are two adjustable length dividers and
twelve adjustable cross dividers per drawer. Storage
surface per drawer = 0.23 m².
Extra-thick 70-mm insulation, made from high-quality,
compression-moulded and environmentally friendly
material. Energy saving.
Self-Closing-Door with easy-to-replace plastic magnetic
seal frame, lockable.
Door hinge on the right-hand side (by default, see
illustration), or the left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes
temperature deviations.
Automatic fast defrosting thanks to time-limited and
temperature-monitored reversal of the refrigerant circuit.
Condensate evaporation in stainless steel heated dish
beneath the refrigerator floor.
Digital data documentation readable via PC-KIT-NET or
USB interface and software KIRSCH Datanet.
Warning functions with visual and audible alarm signal in
the case of temperature deviations and power failure. In
the case of power failure, the monitoring unit remains in
operation for approx. 30 hours on battery power.
Alarms can be forwarded by network or potential-free
contact.
Antifreeze against sub-zero temperatures.
Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low noise, easy to service.

Optional equipment : 

Glass door with lock.
LED-Illumination mounted on side wall.
Top drawer can be locked.
Adjustable feet to compense uneven floors.
Additional length and cross dividers.
Shelf w x d = 59.7 x 45 cm on rails or overlays instead of
drawer (max. load: 40 kg).
Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
60 Hz cooling machine upon request
Vario Suport, Storage Shelf on roller runners.
GSM-Module for alarm text message transmission
( e.g., to a mobile phone).
Temperature documentation:
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Mechanical pen-recording thermometer with two
waxed paper strips.

Additional information

Weight170 kg
Dimensions76 × 77 × 196 cm
Capacity

500 L

Temperature setting

approx. +2 °C to +15 °C

Voltage

220 – 240 V, 50 Hz

Power consumption

260 watts

Normal consumption

1,50 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

560 watts

Interior dimensions

w x d x h = 60 x 57 x 140 cm
(usable depth 10 cm)

Exterior dimensions with door open at 90°

w x d = 77 x 144 cm

Drawer inner dimensions

w x d x h = 57 x 39 x 5.6 cm

Max. load drawer

24 kg

Model

MED 520 ULTIMATE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454