MED 468 ULTIMATE - pharmaqatar

MED 468 ULTIMATE

10,941.95USD

Clear

MED 468 ULTIMATE

PRO-ACTIVE-Control: Permanent, proactive monitoring of
the performance data and alerts in the case of deviations
– so that you can take countermeasures in good time
before a fault threatens your chilled goods; world´s most
accurate temperature control in refrigerated areas thanks
to two standard PT-1000 sensors.
Touch-Display, elegant glass design, capacitive.
Access control with protocol.
Graphical display of the temperature curve and min/max
temperature
External housing made from galvanised sheet steel
(rustproof), with white, anti-scratch powder coating.
Length of the plug cable: approx. 2.8 m.
Adjustable feet to compensate uneven floors.
Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
Interior equipment consists of ten drawers with stops,
on roller runners. There are two adjustable length dividers
and twelve adjustable cross dividers per drawer. Storage
surface per drawer = 0.24 m².
Extra-thick 55-mm insulation, made from high-quality,
compression-moulded and environmentally friendly
material. Energy saving.
Self-Closing-Door with easy-to-replace plastic magnetic
seal frame, lockable.
Door hinge on the right-hand side (by default, see
illustration), or the left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes
temperature deviations.
Automatic defrosting with time limit and temperature
monitoring.
Condensate evaporation in the refrigerating machine
interior.
Warning functions with visual and audible alarm signal
in the case of power failure. In the case of temperature
deviations and power failure, the monitoring unit remains
in operation for approx. 30 hours on battery power. Door
open alarm after 60 seconds.
Alarms can be forwarded by network or potential-free
contact.
Digital data documentation readable via PC-KIT-NET or
USB interface and software KIRSCH Datanet.
Antifreeze against sub-zero temperatures.
Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low noise, easy to service.
Low-noise compressor reduces noise to 40 dB
(corresponds to noise level I; sound perception: whisper).

Optional equipment : 

Glass door with lock.
LED-Illumination mounted at the top or on side wall.
Equipped with castors.
Drawers on roller runners (a maximum of twelve drawers
is possible).
Additional length and cross dividers.
Top drawer can be locked.
Shelf w x d = 59.7 x 50 cm on rails or overlays
(max. load: 40 kg).
Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
60 Hz cooling machinge upon request
GSM-Module for alarm text message transmission
( e.g., to a mobile phone).
Temperature documentation:
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Mechanical pen-recording thermometer with two
waxed paper strips.

Additional information

Weight143 kg
Dimensions75 × 74 × 188 cm
Capacity

460 L

Temperature setting

approx. +2 °C to +20 °C

Voltage

220 – 240 V, 50 Hz

Power consumption

190 watts

Normal consumption

0,91 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

293 watts

Interior dimensions

w x d x h = 60 x 57 x 128 cm
(usable depth 5 cm)

Exterior dimensions with door open at 90°

w x d = 74 x 144 cm

Drawer inner dimensions

w x d x h = 57 x 43 x 5.6 cm

Max. load drawer

24 kg

Model

MED 468 ULTIMATE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454