MED 288 ULTIMATE - pharmaqatar

MED 288 ULTIMATE

7,421.95USD

Clear

MED 288 ULTIMATE

PRO-ACTIVE-Control: Permanent, proactive monitoring of
the performance data and alerts in the case of deviations
– so that you can take countermeasures in good time
before a fault threatens your chilled goods; world´s most
accurate temperature control in refrigerated areas thanks
to two standard PT-1000 sensors.
Touch-Display, elegant glass design, capacitive.
Access control with protocol.
Graphical display of the temperature curve and min/max
temperature
External housing made from galvanised sheet steel
(rustproof), with white, anti-scratch powder coating.
Length of the plug cable: approx. 2.8 m.
Adjustable feet positioned at the front to compensate
uneven floors.
Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
Interior consists of five drawers with stops, on roller
runners. There are two adjustable length dividers and
nine adjustable cross dividers per drawer. Storage surface
per drawer = 0.16 m².
Extra-thick 55-mm insulation, made from high-quality,
compression-moulded and environmentally friendly
material. Energy saving.
Door with easy-to-replace plastic magnetic seal frame,
lockable.
Door hinge on the right-hand side (by default, see illustration),
or the left-hand side, can be retrofitted.
Forced-air cooling,switches off automatically when you
open the door, ensures a uniform temperature and
minimizestemperature deviations.
Automatic defrosting with time limit and temperature
monitoring.
Condensate evaporation in the refrigerating machine
interior.
Warning functions with visual and audible alarm signal
in the case of defective function and power failure. In the
case of power failure, the monitoring unit remains in operation
for approx. 30 hours on battery power. Door open
alarm after 60 seconds.
Alarms can be forwarded by network or potential-free
contact.
Digital data documentation readable via PC-KIT-NET or
USB interface and software KIRSCH Datanet.
Antifreeze against sub-zero temperatures.
Statically ventilated refrigerating machine, hermetically
sealed, energy saving, low noise, easy to service.

Optional equipment :

Glass door with lock.
LED-Illumination mounted at the top.
Decorative door frame for attaching the customer‘s
decorative plates.
Equipped with castors.
Drawers on roller runners (a maximum of 8 drawers is
possible).
Additional length and cross dividers.
Top drawer can be locked.
Shelf 52.7 x 39 cm on rails or overlays (max. load: 40 kg).
Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
60 Hz cooling machinge upon request
GSM-Module for alarm text message transmission
( e.g., to a mobile phone).
Temperature documentation:
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Mechanical pen-recording thermometer with two
waxed paper strips.

Additional information

Weight88 kg
Dimensions70 × 67 × 131 cm
Capacity

280 L

Temperature setting

approx. +2 °C to +15 °C

Voltage

220 – 240 V, 50 Hz

Power consumption

100 watts

Normal consumption

0,69 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

173 watts

Interior dimensions

w x d x h = 53 x 50 x 100 cm
(usable depth above: 5 cm,
below: 13 cm less)

Exterior dimensions with door open at 90°

w x d = 67 x 135 cm

Drawer inner dimensions

w x d x h = 50 x 32 x 5.6 cm

Max. load drawer

16 kg

Model

MED 288 ULTIMATE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454