MED 200 PRO-ACTIVE

MED 200 PRO-ACTIVE

• PRO-ACTIVE-Control: Permanent, proactive monitoring of
the performance data and alerts in the case of deviations –
so that you can take countermeasures in good time before
a fault threatens your chilled goods; world´s most accurate
temperature control in refrigerated areas thanks to two
standard PT-1000 sensors.
• External housing made from galvanised steel sheet
(rust protected), with white, scratch-proof powder coating.
Plug cable length: approx. 2,8 m.
• Adjustable feet positioned at the front to compensate for
uneven floors.
• Interior made from smooth aluminium with colourless
protective coating. Gibs (15 mm increments) for flexible
interior arrangement.
• Interior equipment consists of four drawers on roller
runners with locks and a plastic-coated shelf with support
rails. There is one adjustable length divider and six adjustable
cross dividers per drawer. Storage surface per drawer
= 0.13 m².
• Extra-thick insulation, 50 mm thick, made from high-quality,
pressure-formed and environmentally friendly material.
Energy saving.
• Door with easy-to-replace plastic magnetic seal frame,
lockable.
• Door stop can be switched from side to side (even retrospectively),
right-hand side as standard across the series.
• Re-circulating air cooling, switches off automatically when
you open the door, ensures a uniform temperature and
reduces temperature reductions to a minimum
• Automatic defrost with time limit and temperature
monitoring.
• Defrost water evaporation in the refrigerating machine
room.
• Electronic temperature control protected against tampering by
means of key switches. Membrane keyboard
with digital temperature display and minimum/maximum
temperature memory.
• Data documentation can be read via USB interface with
KIRSCH Datanet software.
• Warning functions with visual and audible alarm signal in
the case of temperature deviations. Power failure alarm,
the monitoring unit remains in operation for approx. 30
hours on battery power.
• Alarms can be forwarded using the potential-free contact
(e.g. to a mobile telephone with optional GSM module or
to central process control).
• Antifreeze against sub-zero temperatures.
• Compressor ventilation will be effected through front grill.

Optional equipment :

• Tabletop
• Decorative door frame for securing the customer’s
decorative plates
• Door fitting
• Transportable design
• Additional length and cross dividers
• 60 Hz cooling machinge upon request
• Shelf with support rails
• Defrost water container can be emptied manually if
evaporation is not desired (e.g. in an operating theatre)
• GSM module for alarm transmission by SMS
(e.g. to a mobile telephone)
• Temperature documentation:
– PC-KIT-NET
– PT 100 or PT 1000 temperature sensor, 4-pin design,
class 1/3 B, including built-in reference body
(measurement bottle or refrigerating block).
– Mechanical pen-recording thermometer with two wax
paper strips.