LABO 520 PRO-ACTIVE - pharmaqatar

LABO 520 PRO-ACTIVE

7,230.75USD

Clear

LABO 520 PRO-ACTIVE

PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of
the plug cable: approx. 3 m.
Equipped with castors.
Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15mm) for flexible interior
arrangement.
Interior consists of five plastic-coated shelves on overlays.
Extra-thick 70 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
Self-closing door with easy-to-replace plastic magnetic
seal frame, lockable.
Door hinge on the right-hand side (by default, see illustration), or the left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes temperature deviations.
Automatic fast defrosting thanks to time-limited and
temperature-monitored reversal of the refrigerant circuit.
Condensate evaporates in stainless steel heated dish
beneath the refrigerator floor.
Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory.
Warning functions with visual and audible alarm signal in
the case of temperature deviations or other malfunctions.
Door open alarm after 60 seconds.
Power failure alarm (visual and audible alarm), the monitoring unit remains in operation for approx. 30 hours on
battery power.
Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
Data documentation can be read via USB interface with
KIRSCH Datanet software.
Antifreeze against sub-zero temperatures.
Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.
Low-noise compressor reduces noise to 40 dB (corresponds to noise level I; sound perception: whisper).

Optional equipment :

Glass door with lock.
LED-Illumination mounted on side wall.
Adjustable feet to compensate uneven floors.
Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
Plastic-drawer on roller runners
(only LABO 520 PRO-ACTIVE) w x d x h = 57 x 39 x 5.6 cm, (a
maximum of twelve drawers is possible).
Aluminium-drawer on roller runners
LABO 520 PRO-ACTIVE: w x d x h = 56 x 39 x 10 cm,
LABO 720 PRO-ACTIVE: w x d x h = 56 x 60 x 10 cm, (a maximum of eight drawers is possible).
Additional length and cross dividers (for drawer).
Stainless steel-drawer (liquid tight)
Additional shelf on rails or overlays.
Basket on rails
Aluminium tray
Vario Support, Storage Shelf on roller runners.
GSM-Module for alarm text message transmission.
Temperature documentation.
– PC-KIT-NET (network capable version)
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body (measurement
bottle or refrigerating block).
– Mechanical pen-recording thermometer with two
waxed paper strips.

Additional information

Weight148 kg
Dimensions76 × 77 × 196 cm
Capacity

500 L

Temperature setting

approx. +0 °C to +15 °C

Voltage

220 – 240 V, 50/60 Hz

Power consumption

250 watts

Normal consumption

1.4 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

553 watts

Interior dimensions

w x d x h =*
62 x 57 x 140 cm

Exterior dimensions with door open at 90°

w x d =
77 x 144 cm

Shelf size

w x d = 59 x 45 cm

Max. load shelf

40 kg

Model

LABO 520 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454