LABO 468 ULTIMATE - pharmaqatar

LABO 468 ULTIMATE

8,203.75USD

Clear

LABO 468 ULTIMATE

PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
Touch-Display, elegant glass design, capacitive.
Access control with protocol.
Graphical display of the temperature curve and min/max
temperature
External housing made from galvanised sheet steel (rustproof), with
white, anti-scratch powder coating. Length of
the plug cable: approx. 2.8 m.
Adjustable feet to compensate uneven floors.
Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
Interior of LABO 340 ULTIMATE consists of one drawer
and four plastic-coated shelves on overlays. Interior of
LABO 468 ULTIMATE consists of four plastic-coated shelves on overlays.
 Extra-thick 55 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
Self-closing door with easy-to-replace plastic magnetic
seal frame, lockable.
Door hinge on the right-hand side (by default, see illustration), or the
left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes temperature
deviation.
Automatic defrosting with time limit and temperature
monitoring.
Condensate evaporates in the refrigerating machine
interior.
Warning functions with visual and audible alarm signal
in the case of defective function and power failure. In the
case of power failure, the monitoring unit remains in operation for approx.
30 hours on battery power. Door open
alarm after 60 seconds.
Alarms can be forwarded by network or potential-free
contact.
Power failure alarm (visual and audible alarm), the monitoring unit remains
in operation for approx. 30 hours on
battery power.
Digital data documentation readable via PC-KIT-NET or
USB interface and software KIRSCH Datanet.
Antifreeze against sub-zero temperatures.
Statically ventilated (LABO 340 ULTIMATE) or ventilationenforced (LABO
468 ULTIMATE) refrigerating machine,
hermetically sealed, energy saving, low-noise, easy to
service.
Low-noise compressor (only LABO 468 ULTIMATE) reduces noise to 40 dB
(corresponds to noise level I; sound perception: whisper)

Optional equipment :

Glass door.
LED-Illumination mounted on side wall.
Decorative door frame for attaching the customer‘s
decorative plates.
Door fitting.
Equipped with castors.
Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
Plastic drawer on roller runners
LABO 340 ULTIMATE: w x d x h = 50 x 32 x 5.6 cm,
LABO 468 ULTIMATE: w x d x h = 57 x 43 x 5.6 cm
(a maximum of twelve drawers is possible).
Additional length and cross dividers.
Additional shelf on rails or overlays.
Basket on rails (only for LABO 468 ULTIMATE)
w x d x h = 60 x 45 x 10 cm.
Aluminium tray with rails (only for LABO 468 ULTIMATE)
w x d x h = 60 x 40 x 2.5 cm.
Vario Suport, Storage Shelf on roller runners.
GSM-Module for alarm text message transmission (e.g.,
to a mobile phone).
Temperature documentation:
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Mechanical pen-recording thermometer with two
waxed paper strips.

Additional information

Weight122 kg
Dimensions80 × 74 × 188 cm
Capacity

460 L

Temperature setting a

approx. +2 °C to +15°C

Voltage

220 – 240 V, 50 Hz

Power consumption

170 watts

Normal consumption

1.00 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

280 watts

Interior dimensions

w x d x h =*
60 x 57 x 128 cm

Exterior dimensions with door open at 90°

w x d =
74 x 144 cm

Shelf size

Shelf size

Max. load drawer/ shelf 1

–/40 kg

Model

LABO 468 ULTIMATE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454