LABO 100 PRO-ACTIVE - pharmaqatar

LABO 100 PRO-ACTIVE

3,659.25USD

Clear

LABO 100 PRO-ACTIVE

PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
External housing made from galvanised sheet steel (rustproof), with
white, anti-scratch powder coating. Length of
the plug cable: approx. 2.8 m.
Adjustable feet to compensate uneven floors.
Interior made from impact-resistant, white plastic with
moulded-in shelves.
Interior consists of two plastic-coated shelves.
Extra-thick 50 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
Lockable door with easy-to-replace plastic magnetic
seal frame.
Door hinge on the right-hand side (by default, see illustration), or the
left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes temperature
deviations.
Automatic defrosting with time and temperature monitoring.
Condensate evaporates in the refrigerating machine
interior.
Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory.
Power failure alarm (visual and audible alarm), the monitoring unit
remains in operation for approx. 30 hours on
battery power.
Warning functions with visual and audible alarm signal in
the case of temperature deviations or other malfunctions.
Door open alarm after 60 seconds.
Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
Data documentation can be read via USB interface with
KIRSCH Datanet software..
Antifreeze against sub-zero temperatures.
Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.
Low-noise compressor reduces noise to 40 dB (corresponds to
noise level I; sound perception: whisper).

Optional equipment :

Glass door with lock.
Tabletop (exterior dimensions: 85cm in height).
Decorative door frame for attaching the customer‘s decorative
plates (exterior dimensions: 55cm in width).
Door fitting.
Equipped with castors.
Additional plastic drawer
w x d x h = 40 x 32 x 5.6 cm.
Additional length and cross dividers for drawer.
n Additional shelf.
Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
GSM-Module for alarm text message transmission
(e.g., to a mobile phone).
Temperature documentation:
– PC-KIT-NET (network capable version)
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body (measurement
bottle or refrigerating block).
– Mechanical pen-recording thermometer with two
waxed paper strips.

Additional information

Weight50 kg
Dimensions54 × 54 × 82 cm
Capacity

95 L

Temperature setting

approx. +2 °C to +20 °C

Voltage

220 – 240 V, 50/60 Hz

Power consumption

76 watts

Normal consumption

0.64 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

184 watts

Interior dimensions

w x d x h = 44 x 43 x 47 cm
(usable depth 5 cm, usable width
2 cm less)

Exterior dimensions with door open at 90°

w x d = 54 x 106 cm

Shelf size

w x d = 43 x 33 cm

Max. load shelf

25 kg

Model

LABO 100 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454