LABEX 720 ULTIMATE - pharmaqatar

LABEX 720 ULTIMATE

13,765.75USD

Clear

LABEX 720 ULTIMATE

• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
• Touch-Display, elegant glass design, capacitive.
• Access control with protocol.
• Graphical display of the temperature curve and min/max
temperature
• External housing made from galvanised sheet steel (rustproof), with
white, anti-scratch powder coating. Length of
the plug cable: approx. 3 m.
• Equipped with castors.
• Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
• Interior consists of five shelves on brackets.
• Extra-thick 70-mm insulation, made from high-quality,
compression-moulded and environmentally friendly material. Energy saving.
• Self-closing door with easy-to-replace plastic magnetic
seal frame, lockable.
• Door hinge on the right-hand side as standard (see
illustration), or the left-hand side, can be retrofitted.
• Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes temperature
deviations.
• Valve controlled pressure compensation for easier door
opening.
• Automatic fast defrosting with time limit and temperature monitoring.
Defrost sensors are protected by safety
barriers.
• Removable condensation container.
• Power failure alarm (visual and audible alarm), the monitoring unit
remains in operation for approx. 30 hours on
battery power.
• Warning functions with visual and audible alarm signal
in the case of defective function and power failure. In the
case of power failure, the monitoring unit remains in operation for approx.
30 hours on battery power. Door open
alarm after 60 seconds.
• Alarms can be forwarded by network or potential-free
contact.
• Digital data documentation readable via PC-KIT-NET or
USB interface and software KIRSCH Datanet.
• Antifreeze against sub-zero temperatures.
• Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.

Optional equipment :

• Glass door with lock.
• Adjustable feet to compensate uneven floors.
• Drawer conductive on roller runners
Only for LABEX® 520 ULTIMATE: w x d x h = 57 x 39 x 5.6
cm (a maximum of twelve drawers is possible).
• Additional length and cross dividers (for drawer).
• Additional shelf on rails or brackets.
• Basket on rails
LABEX® 720 ULTIMATE: w x d x h = 60 x 65 x 10 cm.
• Aluminium tray with rails
LABEX® 720 ULTIMATE: w x d x h = 60 x 65 x 2.5 cm.
• Outer housing in stainless steel 4301, longitudinal
brushed.
• Water-cooled refrigerating machine.
• GSM-Module for alarm text message transmission (e.g.,
to a mobile phone).
• Temperature documentation.
– Temperature sensor PT 100 or PT 1000, with safety
barriers and reference body (measuring bottle or cold
block) is installed.
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body

Additional information

Weight174 kg
Dimensions98 × 77 × 196 cm
Capacity

700 L

Temperature setting

approx. +0 °C to +15 °C

Voltage

220 – 240 V, 50 Hz

Power consumption

237 Watt

Normal consumption

1,23 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

545 Watt

Interior dimensions

w x d x h = *
62 x 77 x 140 cm

Exterior dimensions with door open at 90°

w x d =
77 x 165 cm

Shelfsize

w x d =
59 x 65 cm

Max. load shelf

40 kg

Model

LABEX 720 ULTIMATE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454