FROSTER MED 95 PRO-ACTIVE - pharmaqatar

FROSTER MED 95 PRO-ACTIVE

5,078.55USD

Clear

FROSTER MED 95 PRO-ACTIVE

PRO-ACTIVE-Control: Permanent, proactive monitoring of
the performance data and alerts in the case of deviations
– so that you can take countermeasures in good time
before a fault threatens your chilled goods; world´s most
accurate temperature control in refrigerated areas thanks
to two standard PT-1000 sensors
External housing made from galvanised sheet steel
(rustproof), with white, anti-scratch powder coating.
Length of the plug cable: approx. 2.8 m.
Adjustable feet positioned at the front to compensate
uneven floors.
Interior made from impact-resistant, white plastic with
moulded-in shelves.
Interior consists of one drawer with stop and two plasticcoated
shelves. There is one adjustable length divider and
six adjustable cross dividers per drawer. Storage surface
per drawer = 0.13 m².
Extra-thick 50-mm insulation, made from high-quality,
compression-moulded and environmentally friendly
material. Energy saving.
Door with easy-to-replace plastic magnetic seal frame,
lockable.
Door hinge on the right-hand side (by default, see
illustra-tion), or the left-hand side, can be retrofitted.
Manual defrosting. Removable condensation container.
Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory.
Warning functions with visual and audible alarm signal in
the case of temperature deviations and power failure.
Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
Data documentation can be read via USB interface with
KIRSCH Datanet software.
Rapid freezing cycle ensures that the goods to be cooled
are frozen quickly.
Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low noise, easy to service. Inlet air
and exhaust air flow through the ventilation slits at the
front.
Low-noise compressor reduces noise to 40 dB (corresponds
to noise level I; sound perception: whisper).

Optional equipment :

Tabletop (exterior dimensions: 85 cm in height).
Decorative door frame for attaching the customer‘s
decorative plates.
Door fitting.
Equipped with castors.
Additional drawer or shelf.
Additional length and cross dividers.
Alarm is also triggered in the case of power failure
(visual and audible alarm); the monitoring unit remains
in operation for approx. 30 hours on battery power.
GSM-Module for alarm text message transmission
(e.g., to a mobile phone).
Temperature documentation:
– PC-KIT-NET (network capable version)
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body (measurement
bottle or refrigerating block).
– Mechanical pen-recording thermometer with two
waxed paper strips.
60 Hz cooling machinge upon request

Additional information

Weight54 kg
Dimensions54 × 54 × 82 cm
Capacity

95 L

Temperature setting

approx. -5 °C to -25 °C

Voltage

220 – 240 V, 50 Hz

Power consumption

123 watts

Normal consumption

1,33 kWh/24 h

Admissible ambient temperature

from +10 °C to +32 °C

Heat emission (max.)

162 watts

Interior dimensions

w x d x h = 44 x 42 x 47 cm
(usable depth 5 cm, usable
width 2 cm less)

Exterior dimensions with door open at 90°

w x d = 54 x 105.5 cm

Shelf size

43 x 36 cm

Drawer inner dimensions

w x d x h = 40 x 32 x 5.6 cm

Max. load drawer/shelf

13 kg/25 kg

Model

FROSTER MED 95 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454