FROSTER LABO 530 PRO-ACTIVE - pharmaqatar

FROSTER LABO 530 PRO-ACTIVE

9,555.55USD

Clear

FROSTER LABO 530 PRO-ACTIVE

PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
External housing made from galvanised sheet steel (rustproof), with
white, anti-scratch powder coating. Length of
the plug cable: approx. 3 m.
Equipped with castors.
Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15mm) for flexible interior
arrangement.
Interior consists of five plastic-coated shelves on overlays.
Extra-thick 70 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
Self-closing door with easy-to-replace plastic magnetic
seal frame, lockable.
Door hinge on the right-hand side (by default, see illustration), or the
left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes temperature
deviations.
Automatic fast defrosting thanks to time-limited and
temperature-monitored reversal of the refrigerant circuit.
Condensate evaporates in stainless steel heated dish
beneath the refrigerator floor.
Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory.
Power failure alarm (visual and audible alarm), the monitoring unit
remains in operation for approx. 30 hours on
battery power.
Warning functions with visual and audible alarm signal in
the case of temperature deviations or other malfunctions.
Door open alarm after 60 seconds.
Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
Data documentation can be read via USB interface with
KIRSCH Datanet software.
Rapid freezing cycle ensures that the goods to be cooled
are frozen quickly.
Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.
Door frame heater prevents icing of the door.

Optional equipment  :

LED-Illumination mounted on side wall.
Decorative door frame for attaching the customer‘s decorative plates.
Adjustable feet to compensate for uneven floors.Watercooled
refrigerating machine.
Housing made of stainless steel 4301, longitudinal brushed.
Plastic-drawer on roller runners
(only FROSTER-LABO-530) w x d x h = 57 x 39 x 5.6 cm
(a maximum of twelve drawers is possible).
Aluminium-drawer on roller runners
Additional length and cross dividers (for drawer).
Stainless steel drawer (liquid tight)
Additional shelf on rails or overlays.
Basket on rails
Aluminium tray with rails
Vario Support, Storage Shelf on roller runners.
GSM-Module for alarm text message transmission.
Temperature documentation.
– PC-KIT-NET.
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Disc-type pen recording thermometer, with 7-day
measuring cycle, incorporated, with 100 recording
discs and 5 felt tip pens.

Additional information

Weight183 kg
Dimensions76 × 77 × 196 cm
Capacity

500 L

Temperature setting

approx. -10 °C to -30 °C

Voltage

220 – 240 V, 50 Hz

Power consumption

605 watts

Normal consumption

7.22 kWh/24 h

Admissible ambient temperature

from +10 °C to +32 °C

Heat emission (max.)

753 watts

Interior dimensions

w x d x h =*
62 x 57 x 140 cm

Exterior dimensions with door open at 90°

w x d =
77 x 144 cm

Shelf size

w x d = 59 x 45 cm

Max. load shelf

40 kg

Model

FROSTER LABO 530 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454