FROSTER LABO 330 PRO-ACTIVE - pharmaqatar

FROSTER LABO 330 PRO-ACTIVE

8,229.55USD

Clear

FROSTER LABO 330 PRO-ACTIVE 

PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
External housing made from galvanised sheet steel (rustproof), with
white, anti-scratch powder coating. Length of
the plug cable: approx. 2.8 m.
Adjustable feet to compensate for uneven floors.
Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
Interior consists of four plastic-coated shelves on
overlays.
Extra-thick 70 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
Self-closing door with easy-to-replace plastic magnetic
seal frame, lockable.
Door hinge on the right-hand side (by default, see illustration), or the
left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes temperature
deviations
Automatic fast defrosting thanks to time-limited and
temperature-monitored reversal of the refrigerant circuit.
Condensate evaporates in the refrigerating machine
interior.
Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory.
Power failure alarm (visual and audible alarm), the monitoring unit
remains in operation for approx. 30 hours on
battery power.
Warning functions with visual and audible alarm signal in
the case of temperature deviations or other malfunctions.
Door open alarm after 60 seconds.
Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
Data documentation can be read via USB interface with
KIRSCH Datanet software.
Rapid freezing cycle ensures that the goods to be cooled
are frozen quickly.
Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.
Door frame heater prevents icing of the door.

Optional equipment :

LED-Illumination mounted on side wall.
Decorative door frame for attaching the customer‘s decorative plates.
Equipped with castors.
Aluminium-drawer on roller runners
w x d x h = 53 x 37 x 10 cm (a maximum of five drawers is
possible).
Additional length and cross dividers (for drawer).
Stainless steel drawer (liquid tight)
w x d x h = 53 x 37 x 10 cm (a maximum of five drawers is
possible).
Additional shelf on rails or overlays.
Basket on rails
w x d x h = 56 x 40 x 10 cm.
Vario Support, Storage Shelf on roller runners.
GSM-Module for alarm text message transmission.
Temperature documentation.
– PC-KIT-NET.
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Disc-type pen recording thermometer, with 7-day
measuring cycle, incorporated, with 100 recording
discs and 5 felt tip pens.

Additional information

Weight142 kg
Dimensions78 × 74 × 159 cm
Capacity

300 L

Temperature setting

approx. -10 °C to -30 °C

Voltage

220 – 240 V, 50 Hz

Power consumption

590 watts

Normal consumption

3.69 kWh/24 h

Admissible ambient temperature

from +10 °C to +32 °C

Heat emission (max.)

693 watts

Interior dimensions

w x d x h = 59 x 52 x 95 cm
(usable width 2 cm, usable depth
10 cm, usable height 13 cm less)

Exterior dimensions with door open at 90°

w x d = 74 x 142 cm

Shelf size

w x d = 57 x 42 cm

Max. load shelf

40 kg

Model

FROSTER LABO 330 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454