FROSTER LABEX 96 PRO-ACTIVE - pharmaqatar

FROSTER LABEX 96 PRO-ACTIVE

5,388.25USD

Clear

FROSTER LABEX 96 PRO-ACTIVE

PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of
the plug cable: approx. 2.8 m.
Adjustable feet to compensate uneven floors.
Interior made from impact-resistant, white plastic
with moulded-in shelves.
Interior consists of two plastic-coated shelves.
Extra-thick 50 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
Lockable door with easy-to-replace plastic magnetic
seal frame.
Door hinge on the right-hand side (by default, see illustration), or the left-hand side, can be retrofitted.
Manual defrosting.
Removable condensation container.
Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory. Control and
display sensors protected by safety barriers.
Warning functions with visual and audible alarm signal in
in the case of temperature deviations or other malfunctions.
Power failure alarm (visual and audible alarm), the monitoring unit remains in operation for approx. 30 hours on
battery power.
Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
Data documentation can be read via USB interface with
KIRSCH Datanet software.
Rapid freezing cycle ensures that the goods to be cooled
are frozen quickly.
Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service. Inlet air
and exhaust air flow through the ventilation slits at the front.
Door frame heater prevents icing of the door.
Low-noise compressor reduces noise to 40 dB (corresponds to noise level I; sound perception: whisper).

Optional equipment : 

Tabletop (exterior dimensions: 85 cm in height).
Decorative door frame for attaching the customer‘s
decorative plates.
Door fitting (two pieces required).
Equipped with castors.
Additional plastic drawer w x d x h = 40 x 32 x 5.6 cm
Additional length and cross dividers for drawer.
Additional shelf.
GSM-Module for alarm text message transmission
(e.g., to a mobile phone).
n Temperature documentation.
– PC-KIT-NET.
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Disc-type pen recording thermometer, with 7-day
measuring cycle, incorporated, with 100 recording
discs and 5 felt tip pens.
– Mechanical pen-recording thermometer with two
waxed paper strips

Additional information

Weight50 kg
Dimensions54 × 54 × 82 cm
Capacity

95 L

Temperature setting

approx. -5 °C to -25 °C

Voltage

220 – 240 V, 50/60 Hz

Power consumption

119 watts

Normal consumption

1.36 kWh/24 h

Admissible ambient temperature

from +10 °C to +32 °C

Heat emission (max.)

159 watts

Interior dimensions

w x d x h = 44 x 42 x 47 cm (usable
depth 5 cm, usable width 2 cm less)

Exterior dimensions with door open at 90°

w x d = 54 x 106 cm

Shelf size

w x d = 43 x 36 cm

Max. load shelf

25 kg

Model

FROSTER LABEX 96 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454