FROSTER BL 730 ULTIMATE

FROSTER BL 730 ULTIMATE

• PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT1000 sensors.
• Touch-Display, elegant glass design, capacitive.
• Access control with protocol.
• Graphical display of the temperature curve and min/max temperature.
• External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of the plug cable: approx. 3 m.
• Equipped with castors.
• Interior made from smooth aluminium with colourless protective coating. Gibs (every 15 mm) for flexible interior arrangement.
• Interior consists of five drawers of aluminium, height adjustable on telescopic runners with stops, stacking height: 23 cm.
• Extra-thick 70-mm insulation, made from high-quality, compression-moulded and environmentally friendly material. Energy saving.
• Self-closing door with easy-to-replace plastic magnetic seal frame, lockable.
• Door stop on the right-hand side (by default, see illustration), or the left-hand side, can be retrofitted.
• Forced-air cooling, switches off automatically when you open the door, ensures a uniform temperature and minimizes temperature deviations.
• Automatic fast defrosting thanks to time-limited and temperature-monitored reversal of the refrigerant circuit.
• Condensate evaporates in stainless steel heated dish beneath the refrigerator floor.
• Warning functions with visual and audible alarm signal in the case of defective function and power failure. In the case of power failure, the monitoring unit remains in operation for approx. 30 hours on battery power. Door open
alarm after 60 seconds.
• Alarms can be forwarded by network or potential-free contact.
• Digital data documentation readable via PC-KIT-NET or USB interface and software KIRSCH Datanet.
• Ventilation-enforced refrigerating machine, vibration free, hermetically sealed, energy saving, low-noise, easy to service. Inlet air and exhaust air flow through the ventilation slits at the front.

Optional equipment :

• LED illumination mounted on side wall.
• Adjustable feet to compensate for uneven floors.
• Cooling machine with cold water connection.
• Outer housing in stainless steel 4301, longitudinal brushed.
• Additional drawer made aluminium.
• Drawers insert (set) with 4 adjustable length and 25 (FROSTER BL 530 ULTIMATE) or 40 (FROSTER BL 730 ULTIMATE) cross dividers per drawer.
• Additional length and cross dividers.
• Drawer made of stainless steel, also possible with cover plate, black colored, instead of aluminum.
• Shelf 59.7 x 45 cm on rails or overlays.
• Baskets on rails 60 x 45 x 10 cm.
• Aluminium tray with rails 60 x 40 x 2,5 cm.
• Vario Support, Storage Shelf on roller runners.
• GSM-Module for alarm text message transmission (e.g., to a mobile phone).
• Temperature documentation:
– 4-pin PT 100 or PT 1000 temperature sensor, class 1/3 B, including built-in reference body.
– Mechanical pen-recording thermometer with two waxed paper strips