FROSTER BL 730 PRO-ACTIVE

FROSTER BL 730 PRO-ACTIVE

• PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT1000 sensors.
• External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of the plug cable: approx. 3 m.
• Equipped with castors.
• Interior made from smooth aluminium with colourless protective coating. Gibs (every 15 mm) for flexible interior arrangement.
• Interior consists of five drawers of aluminium, height adjustable on telescopic runners with stops, stacking height: 23 cm. Capacity per drawer:
• Extra-thick 70-mm insulation, made from high-quality, compression-moulded and environmentally friendly material. Energy saving.
• Self-closing door with easy-to-replace plastic magnetic seal frame, lockable.
• Door stop on the right-hand side (by default, see illustration), or the left-hand side, can be retrofitted.
• Forced-air cooling, switches off automatically when you open the door, ensures a uniform temperature and minimizes temperature deviations.
• Automatic fast defrosting thanks to time-limited and temperature-monitored reversal of the refrigerant circuit.
• Condensate evaporates in stainless steel heated dish beneath the refrigerator floor.
• Key switch protected control panel against tampering. Membrane keyboard with digital temperature display and minimum/maximum temperature memory.
• Warning functions with visual and audible alarm signal in the case of power failure and temperature deviations. In the case of power failure, the monitoring unit remains in operation for approx. 30 hours on battery power. Door
open alarm after 60 seconds.
• Alarms can be forwarded using the potential-free contact (e.g., to a mobile phone with optional GSM-Module or to a control centre).
• Data documentation can be read via USB interface with
KIRSCH Datanet software.
• Ventilation-enforced refrigerating machine, vibration free, hermetically sealed, energy saving, low-noise, easy to service. Inlet air and exhaust air flow through the ventilation slits at the front

Optional equipment :

• LED illumination mounted on side wall.
• Adjustable feet to compensate for uneven floors.
• Cooling machine with cold water connection.
• Outer housing in stainless steel 4301, longitudinal brushed.
• Additional drawer made aluminium.
• Drawers insert (set) with 4 adjustable length and 25 (FROSTER BL 530 PRO-ACTIVE) or 40 (FROSTER BL 730 PRO-ACTIVE) cross dividers per drawer.
• Additional length and cross dividers.
• Drawer made of stainless steel, also possible with cover plate, black colored, instead of aluminum.
• Shelf 59.7 x 45 cm on rails or overlays.
• Baskets on rails 60 x 45 x 10 cm.
• Aluminium tray with rails 60 x 40 x 2,5 cm.
• Vario Suport, Storage Shelf on roller runners.
• GSM-Module for alarm text message transmission.
• Temperature documentation:
– PC-KIT-NET.
– 4-pin PT 100 or PT 1000 temperature sensor, class 1/3 B, including built-in reference body.
– Disc-type pen recording thermometer, with 7-day measuring cycle, incorporated, with 100 recording discs and 5 felt tip pens.
– Mechanical pen-recording thermometer with two waxed paper strips.