ESSENTIAL MED 85 DIN

ESSENTIAL MED 85 DIN

• External housing made from galvanised sheet steel
(rustproof), with white, anti-scratch powder coating.
Length of the plug cable: approx. 2.8 m.
• Interior made from impact-resistant, white plastic with
moulded-in shelves.
• Interior consists of three drawers with stops and a
plasticcoated shelf. There is one adjustable length divider and six
adjustable cross dividers per drawer. Storage surface per
drawer = 0.11 m².
• Extra-thick 42-mm insulation, made from high-quality,
compression-moulded and environmentally friendly
material.Energy saving.
• Door with easy-to-replace plastic magnetic seal frame,
lockable.
• Door hinge on the right-hand side (by default, see
illustration), or the left-hand side, can be retrofitted.
• Automatic defrosting with time and temperature
monitoring.
• Forced-air cooling with cross-flow blower, switches off
automatically when you open the door, ensures a uniform
temperature and minimizes temperature deviations.
• Warning functions: visual and audible alarm signal, even
in the case of temperature deviations and power failure.
In the case of power failure, the monitoring unit remains
in operation for approx. 72 hours on battery power. Door
open alarm after 60 seconds.
• Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
• Electronic temperature control with mebrane keyboard
and digital temperature display in the interior.
• Condensate evaporation in the refrigerating machine interior.
• Statically ventilated refrigerating machine, hermetically
sealed, energy saving, low noise, easy to service.
• Antifreeze against sub-zero temperatures.

Optional equipment :

• Decorative door frame for attaching the customer‘s
decorative plates (exterior dimensions: 48 cm in width).
• Door fitting.
• Equipped with castors.
• Additional length and cross dividers.
• Top drawer can be locked.
• Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
• Refrigerating machine fan if static ventilation is not
sufficient after installation into furniture, or if 60 Hz
operation is intended.
• GSM-Module with optional temperature sensor for alarm
text message transmission (e.g., to a mobile phone).
• Temperature documentation:
– PC-supported documentation using DATALOG-NET
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body (measurement
bottle or refrigerating block).
– Mechanical pen-recording thermometer with two
waxed paper strips.