ESSENTIAL MED 85

ESSENTIAL MED 85

• External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of the plug cable: approx. 2.8 m.
• Interior made from impact-resistant, white plastic with moulded-in shelves.
• Interior consists of three drawers with stops and a plasticcoated shelf. There is one adjustable length divider and six adjustable cross dividers per drawer. Storage surface per drawer = 0.11 m².
• Extra-thick 42-mm insulation, made from high-quality, compression-moulded and environmentally friendly material.Energy saving.
• Door with easy-to-replace plastic magnetic seal frame, lockable.
• Door hinge on the right-hand side (by default, see illustration), or the left-hand side, can be retrofitted.
• Automatic defrosting with time and temperature monitoring.
• Condensate evaporation in the refrigerating machine interior.
• Mechanical controller enables variable temperature control. The temperature is maintained automatically, irrespective of changing external temperatures, provided that the ambient temperature is at least approx. 3 °C above the set interior temperature.
• Statically ventilated refrigerating machine, hermetically sealed, energy saving, low noise, easy to service.

Optional equipment :

• Decorative door frame for attaching the customer‘s decorative plates (exterior dimensions: 48 cm in width).
• Door fitting.
• Equipped with castors.
• Additional length and cross dividers.
• Top drawer can be locked.
• Condensate container can be emptied manually if no condensation is required (e.g., in an operating theatre).
• Refrigerating machine fan if static ventilation is not sufficient after installation into furniture, or if 60 Hz operation is intended.
• Temperature documentation:
– PC-supported documentation using DATALOG-NET
– 4-pin PT 100 or PT 1000 temperature sensor, class 1/3 B, including built-in reference body (measurement bottle or refrigerating block).
– Mechanical pen-recording thermometer with two waxed paper strips.