ESSENTIAL MED 125

ESSENTIAL MED 125

• External housing made from galvanised sheet steel (rustproof),
with white, anti-scratch powder coating. Length of
plug cable: approx. 2.8 m.
• Adjustable feet positioned at the front to compensate
uneven floors
• Interior made from impact-resistant, white plastic with
moulded-in shelves.
• Interior consists of three drawers with stops and a plasticcoated
shelf. There is one adjustable length divider and six adjustable
cross dividers per drawer. Storage surface
per drawer = 0.13 m².
• Extra-thick 50-mm insulation, made from high-quality,
compression-moulded and environmentally friendly material.
Energy saving.
• Door with easy-to-replace plastic magnetic seal frame,
lockable.
• Door hinge on the right-hand side (by default, see illustration),
or the left-hand side, can be retrofitted.
• Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes
temperature deviations.
• Automatic defrosting with time limit and temperature
monitoring.
• Condensate evaporation in the refrigerating machine
interior.
• Electronic temperature control with membrane keyboard
and digital temperature display in the interior.
• Warning functions: visual and audible alarm signal, even
in the case of temperature deviations and power failure.
In the case of power failure, the monitoring unit remains
in operation for approx. 30 hours on battery power. Door
open alarm after 60 seconds.
• Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
• Antifreeze against sub-zero temperatures.
• Statically ventilated refrigerating machine, hermetically
sealed, energy saving, low noise, easy to service.

Optional equipment :

• Glass door.
• Tabletop (exterior dimensions: 84 cm in height).
• Decorative door frame for attaching the customer‘s
decorative plates (exterior dimensions: 55 cm in width).
• Door fitting.
• Equipped with castors.
• Top drawer can be locked.
• Additional length and cross dividers.
• Shelf w x d = 43.8 x 33 cm instead of drawer.
• Digital temperature display: optional for external installation
into furniture front.
• Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
• Refrigerating machine fan if static ventilation is not sufficient
after installation, or if 60 Hz operation is intended.
• GSM-Module for alarm text message transmission (e.g.,
to a mobile phone).
• Temperature documentation:
– PC-supported documentation with DATALOG-NET or
DATALOG-USB-MONITORING.
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body (measurement
bottle or refrigerating block).
– Mechanical pen-recording thermometer with two
waxed paper strips.