ESSENTIAL LABEX 125

ESSENTIAL LABEX 125

• External housing made from galvanised sheet steel (rustproof),
with white, anti-scratch powder coating.
Length of plug cable: approx. 2.8 m.
• Adjustable feet at the front to compensate uneven floors.
• Interior made from impact-resistant, white plastic with
moulded-in shelves.
• Interior consists of one plastic drawer with stops and
two plastic-coated shelves. There is one adjustable length
divider and six adjustable cross dividers per drawer.
Storage surface per drawer = 0.13 m².
• Extra-thick 50-mm insulation, made from high-quality,
compression-moulded and environmentally friendly
material.
• Lockable door with easy-to-replace plastic magnetic seal
frame.
• Door hinge on the right-hand side (by default, see
illustration), or the left-hand side, can be retrofitted.
• Manual defrosting.
• Removable condensation container.
• Stepless temperature selection by room thermostate.
The temperature is kept automatically, independent
of changing outside temperatures, provided that the
ambient temperature is at least about 3 °C above the set
temperature.
• Statically ventilated refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.

Optional equipment :

• Glass door.
• Tabletop (exterior dimensions: 84 cm in height).
• Decorative door frame for attaching the customer‘s decorative plates
(exterior dimensions: 55 cm in width).
• Door fitting (two pieces required).
• Equipped with castors.
• Additional drawer.
• Additional length and cross dividers for drawer.
• Additional shelf.
• Refrigerating machine fan if static ventilation is not sufficient after
installation, or if 60 Hz operation is intended.
• Temperature documentation:
– Temperature sensor PT 100 or PT 1000, with safety
barriers and reference body (measuring bottle or cold
block) is installed.
– Mechanical pen-recording thermometer with two
waxed paper strips.