BL 720 ULTIMATE - pharmaqatar

BL 720 ULTIMATE

17,691.95USD

Clear

BL 720 ULTIMATE

PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT1000 sensors.
Touch-Display, elegant glass design, capacitive.
Access control with protocol.
Graphical display of the temperature curve and min/max temperature.
External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of the plug cable: approx. 3 m.
Equipped with castors.
Interior made from smooth aluminium with colourless protective coating. Gibs (every 15 mm) for flexible interior arrangement.
Interior consists of five drawers of aluminium, height adjustable on telescopic runners with stops. Stacking height: 23cm.
Extra-thick 70-mm insulation, made from high-quality, compression-moulded and environmentally friendly material. Energy saving.
Self-closing door with easy-to-replace plastic magnetic seal frame, lockable.
Door stop on the right-hand side (by default, see illustration), or the left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you open the door, ensures a uniform temperature and minimizes temperature deviations.
Automatic fast defrosting thanks to time-limited and temperature-monitored reversal of the refrigerant circuit.
Condensate evaporates in stainless steel heated dish beneath the refrigerator floor.
Warning functions with visual and audible alarm signal in the case of defective function and power failure. In the case of power failure, the monitoring unit remains in operation for approx. 30 hours on battery power. Door open alarm after 60 seconds.
Alarms an be forwarded by network or potential-free contact.
Digital data documentation readable via PC-KIT-NET or USB interface and software KIRSCH Datanet.
Antifreeze against sub-zero temperatures.
Ventilation-enforced refrigerating machine, vibration free, hermetically sealed, energy saving, low-noise, easy to service. Inlet air and exhaust air flow through the ventilation slits at the front.
Low-noise compressor reduces noise to 40 dB (corresponds to noise level I; sound perception: whisper).

Optional equipment :

Glass door with lock.
LED illumination mounted at the top.
Adjustable feet to compensate for uneven floors.
Cooling maschine with cold water connection.
 Outer housing in stainless steel 4301, longitudinal brushed.
Additional drawer made of aluminium.
Drawer insert (set) with 4 adjustable length and 40 cross dividers per drawer.
Additional length and cross dividers.
Drawer made of stainless steel instead of aluminium.
Shelf 59.7 x 45 cm on rails or overlays.
Baskets on rails 60 x 65 x 10 cm.
Aluminium tray with rails 60 x 65 x 2,5 cm.
Condensate container can be emptied manually if no condensation is required (e.g., in an operating theatre).
Vario Suport, Storage Shelf on roller runners.
GSM-Module for alarm text message transmission ( e.g., to a mobile phone).
Temperature documentation:
– 4-pin PT 100 or PT 1000 temperature sensor, class 1/3 B, including built-in reference body.
– Mechanical pen-recording thermometer with two waxed paper strips.

Additional information

Weight196 kg
Dimensions98 × 77 × 196 cm
Capacity

700 L

Temperature setting

+4 °C

Voltage

220 – 240 V, 50/60 Hz

Power consumption

250 watts

Normal consumption

1.56 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

554 watts

Interior dimensions

w x d x h = 62 x 77 x 140 cm
(usable width 2cm, usable depth
11cm usable heigth 13 cm less)

Drawer inner dimensions

w x d x h = 56 x 60 x 10 cm

Max. load drawer

50 kg

Model

BL 720 ULTIMATE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454