BL 300 ULTIMATE* - pharmaqatar

BL 300 ULTIMATE*

13,249.55USD

Clear

BL 300 ULTIMATE*

PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT1000 sensors.
Touch Display, elegant glass design, capacitive.
Access control with protocol.
Graphical display of the temperature curve and min/max temperature
External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of the plug cable: approx. 2.8 m.
Adjustable feet positioned at the front to compensate for uneven floors.
Interior made from smooth aluminium with colourless protective coating. Gibs (every 15 mm) for flexible interior arrangement.
Interior consists of four drawers of aluminium, three are height adjustable on telescopic runners with stops. Stacking height: 22cm.
Extra-thick 55-mm insulation, made from high-quality, compression-moulded and environmentally friendly material. Energy saving.
Self-closing door with easy-to-replace plastic magnetic seal frame, lockable.
Door stop on the right-hand side, or the left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you open the door, ensures a uniform temperature and minimizes temperature deviations.
Automatic defrosting with time limit and temperature monitoring.
Condensate evaporation in the refrigerating machine room.
Warning functions with visual and audible alarm signal in the case of defective function and power failure. In the case of power failure, the monitoring unit remains in operation for approx. 30 hours on battery power. Door open alarm after 60 seconds.
Alarms can be forwarded by network or potential-free contact.
Digital data documentation readable via PC-KIT-NET or USB interface and software KIRSCH Datanet.
Antifreeze against sub-zero temperatures.
Statically ventilated refrigerating machine, vibration free, hermetically sealed, energy saving, low-noise, easy to service.

Additional information

Weight92 kg
Dimensions75 × 67 × 131 cm
Capacity

280 L

Temperature setting

+4 °C

Voltage

220 – 240 V/50 Hz

Refrigerating machine for 60 Hz operation

Optional

Power consumption (in watts)

95

Normal consumption (in kWh/24 h)

0.63

Permitted ambient temperature

from +10 °C to +38 °C

Heat emission (max. in watts)

170

Drawer inner dimensions (W x D x H in cm)

49 x 39 x 10 top drawers
51 x 31 x 10 bottom drawer

Max. load: drawer

50 kg

Noise emission (for Ecool R600a)

40.3 dB (A)

Automatic defrost

Yes

Defrost water container for manual draining

Optional

Temperature deviation Δ T compliant with DIN 58371 without defrosting

0.8 °C

Re-circulating air cooling

Yes

Alerts in case of power failure

Yes

Glass door with lock

Optional

Equipped with castors

Optional

Door coupling fitting

Optional

Refrigerating machine fan, built-in

Optional

LED lighting strip mounted on the roof of the interior

Optional

Adjustment gibs/variable interior arrangement

Yes

Aluminium drawer with roller runners

4

Stainless steel drawer with roller runners

Optional

Drawer insert in a set

Optional

Vario Support

Optional

Shelf with overlays

Optional

Shelf with rails

Optional

Model

BL 300 ULTIMATE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454