ESSENTIAL FROSTER LABEX 71

ESSENTIAL FROSTER LABEX 71

• External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of
the plug cable: approx. 2.8 m.
• Interior made from impact-resistant, white plastic with
moulded-in shelves.
• Interior consists of four plastic-coated shelves.
• Extra-thick 55-mm insulation, made from high-quality,
compression-moulded and environmentally friendly material. Energy saving.
• Lockable door with easy-to-replace plastic magnetic seal
frame.
• Door hinge on the right-hand side (by default, see illustration), or the left-hand side, can be retrofitted.
• Manual defrosting.
• Mechanical controller enables variable temperature
control. The temperature is maintained automatically,
irrespective of changing external temperatures, provided
that the ambient temperature is at least approx. 3 °C
above the set interior temperature.
• Statically ventilated refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.
• Door frame heater prevents icing of the door.

Optional equipment :

• Decorative door frame for attaching the customer‘s decorative plates.
• Door fitting (two pieces required).
• Equipped with castors.
• Refrigerating machine fan: required when the system is
used as a built-in freezer if static ventilation is insufficient.
• Temperature documentation.
– PC-supported documentation with DATALOG-NET
– Temperature sensor PT 100 or PT 1000, with safety
barriers and reference body (measuring bottle or cold
block) is installed.
– Mechanical pen-recording thermometer with two
waxed paper strips.