LABEX 288 PRO-ACTIVE

LABEX 288 PRO-ACTIVE

• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
• External housing made from galvanised sheet steel
(rustproof), with white, anti-scratch powder coating.
Length of the plug cable: approx. 2.8 m.
• Adjustable feet at the front to compensate uneven floors.
• Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
• Interior consists of one drawer (conductive) with stops
on roller runners and three height adjustable shelves on
overlays.
There are two adjustable length divider and nine
adjustable cross dividers per drawer. Storage surface
per drawer = 0.16 m².
• Extra-thick 55-mm insulation, made from high-quality,
compression-moulded and environmentally friendly
material. Energy saving.
• Lockable door with easy-to-replace plastic magnetic seal
frame.
• Door hinge on the right-hand side (by default, see
illustration), or the left-hand side, can be retrofitted.
• Forced-air cooling (axial fan is proteced), switches off
automatically when you open the door, ensures a uniform
temperature and minimizes temperature deviations.
• Automatic defrosting with time limit and temperature
monitoring. Defrost sensors are protected by safety
barriers.
• Removable condensation container.
• Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory. Control and
display sensors protected by safety barriers.
• Power failure alarm (visual and audible alarm),
the monitoring unit remains in operation for approx.
30 hours on battery power.
• Warning functions with visual and audible alarm signal in
the case of temperature deviations or other malfunctions.
Door open alarm after 60 seconds (only LABEX®-288).
• Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
• Data documentation can be read via USB interface with
KIRSCH Datanet software.
• Antifreeze against sub-zero temperatures.
• Statically ventilated refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.

Optional equipment :

• Glass door with lock.
• Decorative door frame for attaching the customer‘s
decorative plates.
• Door fitting (two pieces required).
• Drawer on roller runners (a maximum of seven
drawers is possible).
• Additional length and cross dividers (for drawer).
• Additional shelf on rails or overlays.
• GSM-Module for alarm text message transmission
(e.g., to a mobile phone).
• Temperature documentation.
– Temperature sensor PT 100 or PT 1000, with safety
barriers and reference body (measuring bottle or cold
block) is installed.
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Mechanical pen-recording thermometer with two
waxed paper strips.