LABEX 105 PRO-ACTIVE - pharmaqatar

LABEX 105 PRO-ACTIVE

4,544.55USD

Clear

LABEX 105 PRO-ACTIVE

PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
External housing made from galvanised sheet steel (rustproof), with

white, anti-scratch powder coating.
Length of the plug cable: approx. 2.8 m.
Adjustable feet at the front to compensate uneven floors.
Interior made from impact-resistant, white plastic with
moulded-in shelves.
Interior consists of one drawer with stops and two plasticcoated shelves.
There is one adjustable length divider and
six adjustable cross dividers per drawer. Storage surface
per drawer = 0.13 m².
Extra-thick 50-mm insulation, made from high-quality,
compression-moulded and environmentally friendly material. Energy saving.
Lockable door with easy-to-replace plastic magnetic seal
frame.
Door hinge on the right-hand side (by default, see illustration), or the
left-hand side, can be retrofitted.
Automatic defrosting with time limit and temperature
monitoring. Defrost sensors are protected by safety
barriers.
Removable condensation container.
Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory. Control and
display sensors protected by safety barriers.
Power failure alarm (visual and audible alarm), the monitoring unit
remains in operation for approx. 30 hours on
battery power.
Warning functions with visual and audible alarm signal in
the case of temperature deviations or other malfunctions.
Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
Data documentation can be read via USB interface with
KIRSCH Datanet software.
Antifreeze against sub-zero temperatures.
Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.
Low-noise compressor reduces noise to 40 dB (corresponds to
noise level I; sound perception: whisper).

Optional equipment : 

Glass door with lock.
Tabletop (exterior dimensions: 85 cm in height).
Decorative door frame for attaching the customer‘s decorative plates
(exterior dimensions: 55 cm in width).
Door fitting.
Additional plastic drawer.
Additional length and cross dividers for drawer.
Additional shelf.
GSM-Module for alarm text message transmission
(e.g., to a mobile phone).
Temperature documentation.
– Temperature sensor PT 100 or PT 1000, with safety
barriers and reference body (measuring bottle or cold
block) is installed.
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Mechanical pen-recording thermometer with two
waxed paper strips.

Additional information

Weight50 kg
Dimensions54 × 54 × 82 cm
Capacity

95 L

Temperature setting

approx. +2 °C to +15 °C

Voltage

220 – 240V, 50/60 Hz

Power consumption

86 watts

Normal consumption

0.42 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

191 watts

Interior dimensions

w x d x h = 44 x 43 x 47 cm
(usable depth 5 cm, usable width
2 cm less)

Exterior dimensions with door open at 90°

w x d = 54 x 106 cm

Shelf size

w x d = 43 x 36 cm

Drawer inner dimensions

w x d x h = 40 x 32 x 5.6 cm

Max. load drawer/shelf

13 kg/25 kg

Model

LABEX 105 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454