LABO 468 PRO-ACTIVE

LABO 468 PRO-ACTIVE

• PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
• External housing made from galvanised sheet steel (rustproof), with
white, anti-scratch powder coating. Length of
the plug cable: approx. 2.8 m.
• Adjustable feet to compensate uneven floors.
• Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
• Interior of LABO 340 PRO-ACTIVE consists of one drawer
and four plastic-coated shelves on overlays. Interior of
LABO 468 PRO-ACTIVE consists of four plastic-coated
shelves on overlays.
• Extra-thick 55 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
• Self-closing door with easy-to-replace plastic magnetic
seal frame, lockable.
• Door hinge on the right-hand side (by default, see illustration), or the
left-hand side, can be retrofitted
• Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes temperature
deviation.
• Automatic defrosting with time limit and temperature
monitoring.
• Condensate evaporates in the refrigerating machine
interior.
• Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory.
• Warning functions with visual and audible alarm signal in
the case of temperature deviations or other malfunctions.
Door open alarm after 60 seconds.
• Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
• Power failure alarm (visual and audible alarm), the monitoring unit remains
in operation for approx. 30 hours on
battery power.
• Data documentation can be read via USB interface with
KIRSCH Datanet software.
• Antifreeze against sub-zero temperatures.
• Statically ventilated (LABO 340 PRO-ACTIVE) or ventilation-enforced (LABO
468 PRO-ACTIVE) refrigerating
machine, hermetically sealed, energy saving, low-noise,
easy to service.

Optional equipment :

• Glass door with lock.
• LED-Illumination mounted on side wall.
• Decorative door frame for attaching the customer‘s
decorative plates.
• Door fitting.
• Equipped with castors.
• Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
• Plastic drawer on roller runners
• Additional length and cross dividers.
• Additional shelf on rails or overlays.
• Basket on rails (only for LABO 468 PRO-ACTIVE)
w x d x h = 60 x 45 x 10 cm.
• Aluminium tray with rails (only for LABO 468 PRO-ACTIVE)
w x d x h = 60 x 40 x 2.5 cm.
• Vario Support, Storage Shelf on roller runners.
• GSM-Module for alarm text message transmission.
• Temperature documentation:
– PC-KIT-NET (network capable version)
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body (measurement
bottle or refrigerating block).
– Mechanical pen-recording thermometer with two
waxed paper strips.