LABO 340 PRO-ACTIVE - pharmaqatar

LABO 340 PRO-ACTIVE

4,623.75USD

Clear

LABO 340 PRO-ACTIVE

PRO-ACTIVE- Control:
Permanent, proactive monitoring of the performance data
and alerts in the case of deviations – so that you can take
countermeasures in good time before a fault threatens
your chilled goods; world´s most accurate temperature
control in refrigerated areas thanks to two standard PT1000 sensors.
External housing made from galvanised sheet steel (rustproof), with
white, anti-scratch powder coating. Length of
the plug cable: approx. 2.8 m.
Adjustable feet to compensate uneven floors.
Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
Interior of LABO 340 PRO-ACTIVE consists of one drawer
and four plastic-coated shelves on overlays. Interior of
LABO 468 PRO-ACTIVE consists of four plastic-coated
shelves on overlays.
Extra-thick 55 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
Self-closing door with easy-to-replace plastic magnetic
seal frame, lockable.
Door hinge on the right-hand side (by default, see illustration), or the
left-hand side, can be retrofitted
Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes temperature
deviation.
Automatic defrosting with time limit and temperature
monitoring.
Condensate evaporates in the refrigerating machine
interior.
Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory.
Warning functions with visual and audible alarm signal in
the case of temperature deviations or other malfunctions.
Door open alarm after 60 seconds.
Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
Power failure alarm (visual and audible alarm), the monitoring unit
remains in operation for approx. 30 hours on
battery power.
Data documentation can be read via USB interface with
KIRSCH Datanet software.
Antifreeze against sub-zero temperatures.
Statically ventilated (LABO 340 PRO-ACTIVE) or ventilation-enforced
(LABO 468 PRO-ACTIVE) refrigerating
machine, hermetically sealed, energy saving, low-noise,
easy to service.

Optional equipment :

Glass door with lock.
LED-Illumination mounted on side wall.
Decorative door frame for attaching the customer‘s
decorative plates.
Door fitting.
Equipped with castors.
Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
Plastic drawer on roller runners
Additional length and cross dividers.
Additional shelf on rails or overlays.
Basket on rails (only for LABO 468 PRO-ACTIVE)
w x d x h = 60 x 45 x 10 cm.
Aluminium tray with rails (only for LABO 468 PRO-ACTIVE)
w x d x h = 60 x 40 x 2.5 cm.
Vario Support, Storage Shelf on roller runners.
GSM-Module for alarm text message transmission.
Temperature documentation:
– PC-KIT-NET (network capable version)
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body (measurement
bottle or refrigerating block).
– Mechanical pen-recording thermometer with two
waxed paper strips.

Additional information

Weight100 kg
Dimensions69 × 67 × 188 cm
Capacity

330 L

Temperature setting

approx. +2 °C to +20°C

Voltage

220 – 240 V, 50/60 Hz

Power consumption

110 watts

Normal consumption

0.65 kWh/24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

166 watts

Interior dimensions

w x d x h =*
53 x 45 x 128 cm

Exterior dimensions with door open at 90°

w x d =
67 x 121 cm

Shelf size

w x d = 52 x 39 cm

Drawer inner dimensions

w x d x h =
50 x 32 x 5.6 cm

Max. load drawer/ shelf

16 kg/40 kg

Model

LABO 340 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454