LABO 288 PRO-ACTIVE - pharmaqatar

LABO 288 PRO-ACTIVE

4,251.75USD

Clear

LABO 288 PRO-ACTIVE

PRO-ACTIVE- Control: Permanent, proactive monitoring
of the performance data and alerts in the case of deviations – so that
you can take countermeasures in good
time before a fault threatens your chilled goods; world´s
most accurate temperature control in refrigerated areas
thanks to two standard PT-1000 sensors.
External housing made from galvanised sheet steel (rustproof), with
white, anti-scratch powder coating. Length of
the plug cable: approx. 2.8 m.
Adjustable feet to compensate for uneven floors.
Interior made from smooth aluminium with colourless
protective coating. Gibs (every 15 mm) for flexible interior
arrangement.
Interior consists of three plastic-coated shelves on overlays.
Extra-thick 55 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
Door with easy-to-replace plastic magnetic
seal frame, lockable.
Door stop on the right-hand side (by default, see illustration), or
the left-hand side, can be retrofitted.
Forced-air cooling with cross-flow blower, switches off
automatically when you open the door, ensures a uniform
temperature and minimises temperature deviations.
Automatic defrosting with time limit and temperature
monitoring.
Condensate evaporates in the refrigerating machine
interior.
Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory.
Power failure alarm and data recording (visual and audible alarm),
the monitoring unit remains in operation for
approx. 30 hours on battery power.
Warning functions with visual and audible alarm signal in
the case of temperature deviation or other malfunctions.
Door open alarm after 60 seconds.
Alarms can be forwarded using a potential-free contact
(e.g., to a mobile phone with optional GSM module or to
a control centre).
Data documentation can be read via USB interface with
KIRSCH Datanet software.
Antifreeze against sub-zero temperatures.
Statically ventilated refrigerating machine, hermetically
sealed, energy saving, low noise, easy to service.

Optional equipment :

Glass door with lock.
LED-Illumination at the top.
Decorative door frame for attaching the customer‘s
decorative plates.
Door fitting.
n Equipped with castors.
60 Hz cooling machine upon request
Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
Plastic-drawer on roller runners
w x d x h = 50 x 32 x 5.6 cm (inner dimension)
Aluminum-drawer on roller runners
w x d x h = 49 x 39 x 10 cm (inner dimension)
Stainless steel-drawer
w x d x h = 49 x 39 x 10 cm (inner dimension)
Additional length and cross dividers (for drawer).
Additional shelf on rails or overlays.
Vario Support, Storage Shelf on roller runners.
GSM-Modul for alarm text message transmission.
Temperature documentation:
– PC-KIT-NET (network capable version)
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body (measurement
bottle or refrigerating block).
– Mechanical pen-recording thermometer with two
waxed paper strips.

Additional information

Weight87 kg
Dimensions70 × 67 × 124 cm
Capacity

280 L

Temperature setting

approx. +2 °C to +20 °C

Voltage

220 – 240 V, 50 Hz

Power consumption

88 watts

Normal consumption

0,68 kWh / 24 h

Admissible ambient temperature

from +10 °C to +38 °C

Heat emission (max.)

165 watts

Interior dimensions

w x d x h = 53 x 50 x 100 cm
(usable depth above: 5 cm,
below: 13 cm less)

Exterior dimensions with door open at 90°

w x d = 67 x 130 cm

Shelf inner dimensions

w x d = 52 x 39 cm

Max. load shelf

40 kg

Model

LABO 288 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454