No products in the cart.
ESSENTIAL LABO 85
Roll over image to zoom in
2,167.99USD
ESSENTIAL LABO 85
• External housing made from galvanised sheet steel (rustproof), with
white, anti-scratch powder coating. Length of
the plug cable: approx. 2.8 m.
• Interior made from impact-resistant, white plastic with
moulded-in shelves.
• Interior consists of one drawer with stops and two plasticcoated
shelves.There is one adjustable length divider and
six adjustable cross dividers per drawer. Storage surface
per drawer = 0.11 m².
• Extra-thick 42 mm energy saving insulation, made from
high-quality, compression-moulded and environmentally
friendly material.
• Lockable door with easy-to-replace plastic magnetic
seal frame.
• Door hinge on the right-hand side (by default, see illustration), or
the left-hand side, can be retrofitted.
• Automatic defrosting with time and temperature monitoring.
• Condensate evaporates in the refrigerating machine
interior.
• Mechanical controller enables variable temperature
control. The temperature is maintained automatically,
irrespective of changing external temperatures, provided
that the ambient temperature is at least approx. 3 °C
above the set interior temperature.
• Statically ventilated refrigerating machine, hermetically
sealed, energy saving, low-noise, easy to service.
Optional equipment :
• Decorative door frame for attaching the customer‘s decorative
plates (exterior dimensions: 48cm in width).
• Door fitting.
• Equipped with castors.
• Additional plastic drawer.
• Additional length and cross dividers.
• Top drawer can be locked.
• 60 Hz cooling machine upon request.
• Condensate container can be emptied manually if no
condensation is required (e.g., in an operating theatre).
• Refrigerating machine fan if static ventilation is not
sufficient after installation.
• GSM-Module for alarm text message transmission
(e.g., to a mobile phone).
• Temperature documentation:
– PC-supported documentation with DATALOG-NET
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body.
– Mechanical pen-recording thermometer with two
waxed paper strips.
Additional information
| Weight | 97 kg |
|---|---|
| Dimensions | 51 × 47 × 74 cm |
| Capacity | 80 L |
| Temperature setting | approx. +2 °C to +12 °C |
| Voltage | 220 – 240 V, 50 Hz |
| Power consumption | 100 watts |
| Normal consumption | 0.60 kWh/24 h |
| Admissible ambient temperature | from +10 °C to +38 °C |
| Heat emission (max.) | 107 watts |
| Interior dimensions | w x d x h = 38 x 41 x 63 cm |
| Exterior dimensions with door open at 90° | w x d = 47 x 96 cm |
| Shelf size | w x d = 23 x 37 cm |
| Drawer inner dimensions | w x d x h = 34 x 32 x 5.6 cm |
| Max. load drawer/shelf | 9.5 kg/25 kg |
| Model | ESSENTIAL LABO 85 |
