MED 600 PRO-ACTIVE

MED 600 PRO-ACTIVE

• PRO-ACTIVE-Control: Permanent, proactive monitoring of
the performance data and alerts in the case of deviations
– so that you can take countermeasures in good time
before a fault threatens your chilled goods; world´s most
accurate temperature control in refrigerated areas thanks
to two standard PT-1000 sensors.
• External housing made from galvanised sheet steel
(rustproof), with white, anti-scratch powder coating.
Length of the plug cable: approx. 3 m.
• Adjustable feet to compensate uneven floors.
• Interior made from smooth aluminium with colourless
protective coating.
• Interior consists of 12 medication drawers with stops, on
roller runners and transparent bases. There is one fixed
cross divider, two lenght dividers and 16 adjustable cross
dividers per drawer. Storage surface per drawer = 0.22 m².
• Extra-thick 60-mm insulation, made from high-quality,
compression-moulded and environmentally friendly
material. Energy saving.
• Door with easy-to-replace plastic magnetic seal frame,
lockable.
• Door hinge on the right-hand side (by default, see
illustra-tion), or the left-hand side, can be retrofitted.
• Forced-air cooling, switches off automatically when you
open the door, ensures a uniform temperature and minimizes
temperature deviations.
• Automatic fast defrosting thanks to time-limited and
temperature-monitored reversal of the refrigerant circuit.
• Condensate evaporation in the refrigerating machine
interior.
• Key switch protected control panel against tampering.
Membrane keyboard with digital temperature display and
minimum/maximum temperature memory.
• Warning functions with visual and audible alarm signal
in the case of temperature deviations and power failure.
In the case of power failure, the monitoring unit remains
in operation for approx. 30 hours on battery power. Door
open alarm after 60 seconds.
• Alarms can be forwarded using the potential-free contact
(e.g., to a mobile phone with optional GSM-Module or to
a control centre).
• Data documentation can be read via USB interface with
KIRSCH Datanet softwareAntifreeze against sub-zero
temperatures.
• Ventilation-enforced refrigerating machine, hermetically
sealed, energy saving, low noise, easy to service. Inlet air
and exhaust air flow through the ventilation slits at the
front.

Optional equipment :

• Decorative door frame for attaching the customer‘s
decorative plates.
• Door fitting.
• Additional cross dividers.
• GSM-Module for alarm text message transmission
(e.g., to a mobile phone).
• 60 Hz cooling machinge upon request
• Temperature documentation:
– PC-KIT-NET
– 4-pin PT 100 or PT 1000 temperature sensor, class
1/3 B, including built-in reference body (measurement
bottle or refrigerating block).
– Mechanical pen-recording thermometer with two
waxed paper strips.