FROSTER BL 180 PRO-ACTIVE - pharmaqatar

FROSTER BL 180 PRO-ACTIVE

11,570.55USD

Clear

FROSTER BL 180 PRO-ACTIVE

PRO-ACTIVE- Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most accurate temperature control in refrigerated areas thanks to two standard PT1000 sensors
External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of the plug cable: approx. 2.8 m.
Adjustable feet to compensate for uneven floors.
Interior made from smooth aluminium with colourless protective coating.
Interior consists of three drawers of stainless steel with stops,with cover plate on telescopic runners. Capacity per drawer app.
Extra-thick 70-mm insulation, made from high-quality, compression-moulded and environmentally friendly material. Energy saving.
Self-closing door with easy-to-replace plastic magnetic seal frame, lockable.
Door stop on the right-hand side (by default, see illustratin), or the left-hand side, can be retrofitted.
Forced-air cooling, switches off automatically when you open the door, ensures a uniform temperature and minimizes temperature deviations.
Automatic fast defrosting thanks to time-limited and temperature-monitored reversal of the refrigerant circuit.
Condensate evaporates in stainless steel heated dish beneath the refrigerator floor.
Key switch protected control panel against tampering. Membrane keyboard with digital temperature display and minimum/maximum temperature memory.
Warning functions with visual and audible alarm signal in the case of power failure and temperature deviations. In the case of power failure, the monitoring unit remains in operation for approx. 30 hours on battery power. Door
open alarm after 60 seconds.
Alarms can be forwarded using the potential-free contact (e.g., to a mobile phone with optional GSM-Module or to a control centre).
Data documentation can be read via USB interface with KIRSCH Datanet software.
Ventilation-enforced refrigerating machine, vibration free, hermetically sealed, energy saving, low-noise, easy to service. Inlet air and exhaust air flow through the ventilation slits at the front.

Optional equipment :

Equipped with castors.
Drawer insert (set) with 3 adjustable length and 21 cross
dividers per drawer.
Additional length and cross dividers.
GSM-Module for alarm text message transmission.
Temperature documentation:
– PC-KIT-NET.
– 4-pin PT 100 or PT 1000 temperature sensor, class 1/3 B, including built-in reference body.
– Disc-type pen recording thermometer, with 7-day measuring cycle, incorporated, with 100 recording discs and 5 felt tip pens.

Additional information

Weight110 kg
Dimensions77 × 70 × 122 cm
Capacity

170 L

Temperature setting

-41 °C

Voltage

220 – 240 V, 50 Hz

Power consumption

453 watts

Normal consumption

6.54 kWh/24 h

Admissible ambient temperature

from +10 °C to +32 °C

Heat emission (max.)

489 watts

Interior dimensions

w x d x h = 55 x 52 x 60 cm (usable width 3 cm, usable depth
15 cm, usable height 13 cm less)

Drawer inner dimensions

w x d x h = 52 x 32 x 10 cm

Max. load drawer

50 kg

Model

FROSTER BL 180 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454