BL 100 Pro-Active - pharmaqatar

BL 100 Pro-Active

6,714.55USD

Clear

BL 100 Pro-Active 

PRO-ACTIVE-Control: Permanent, proactive monitoring of the performance data and alerts in the case of deviations – so that you can take countermeasures in good time before a fault threatens your chilled goods; world´s most
accurate temperature control in refrigerated areas thanks to two standard PT-1000 sensors.
External housing made from galvanised sheet steel (rustproof), with white, anti-scratch powder coating. Length of the plug cable: approx. 2.8 m.
Adjustable feet positioned at the front to compensate for uneven floors.
Interior made from impact-resistant, white plastic.
Interior consists of two drawers on telescopic runners with stops. Stacking height: 19 cm. Capacity per drawer app. 18 blood bags, each 500 ml size.
Extra-thick 50-mm insulation, made from high-quality, compression-moulded and environmentally friendly material. Energy saving.
Door with easy-to-replace plastic magnetic seal frame, lockable.
Door stop on the right-hand side (by default, see illustration), or the left-hand side, can be retrofitted.
Forced-air cooling with axial blower, switches off automatically when you open the door, ensures a uniform temperature and minimizes temperature deviations.
Automatic defrosting with time limit and temperature monitoring.
Condensate evaporation in the refrigerating machine room.
Key switch protected control panel against tampering. Membrane keyboard with digital temperature display and minimum/maximum temperature memory.
Warning functions with visual and audible alarm signal in the case of power failure and temperature deviations. In the case of power failure, the monitoring unit remains in operation for approx. 72 hours on battery power. Door open alarm after 60 seconds.
Alarms can be forwarded using the floating contact (e.g., to a mobile phone with optional GSM-Module or to a control centre).
Data documentation can be read via USB interface with KIRSCH Datanet software.
Antifreeze against sub-zero temperatures.
Ventilation-enforced refrigerating machine, vibration free, hermetically sealed, energy saving, low-noise, easy to service. Inlet air and exhaust air flow through the ventilation slits at the front.
Low-noise compressor reduces noise to 40 dB (corresponds to noise level I; sound perception: whisper).

Additional information

Weight50 kg
Dimensions54 × 54 × 82 cm
Capacity

95 L

Temperature setting

+4 °C

Voltage

220 – 240 V/50 Hz

Refrigerating machine for 60 Hz operation

optional

Power consumption (in watts)

92

Normal consumption (in kWh/24 h)

0.64

Permitted ambient temperature

from +10 °C to +38 °C

Heat emission (max. in watts)

195

Interior dimensions (W x D x H in cm )

44 x 43 x 47
(usable width 2 cm, usable depth 7 cm, usable height 8 cm less)

Drawer inner dimensions (W x D x H in cm)

37 x 32 x 8.5

Max. load: drawer

25 kg

Noise emission (for Ecool R600a)

40.5 dB (A)

Automatic defrost

Yes

Defrost water container for manual draining

optional

Temperature deviation Δ T compliant with DIN 58371 without defrosting

0.9 °C

Re-circulating air cooling

Yes

Alerts in case of power failure

Yes

Glass door with lock

Optional

Equipped with castors

Optional

Tabletop

Optional

Can be installed normally or under counters

Yes

Decorative frame

Optional

Door coupling fitting

Optional

Refrigerating machine fan, built-in

Yes

LED lighting strip mounted on the roof of the interior

Optional

Model

BL 100 PRO-ACTIVE


Fatal error: Uncaught Error: Class 'Elementor\Scheme_Color' not found in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php:1454Stack trace:#0 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(2384): Elementor\ElementsKit_Widget_Blog_Posts->_register_controls()#1 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(1065): Elementor\Controls_Stack->init_controls()#2 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(569): Elementor\Widget_Base->init_controls()#3 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/widget-base.php(192): Elementor\Controls_Stack->get_stack()#4 /home1/pharmaqa/public_html/wp-content/plugins/elementor/includes/base/controls-stack.php(314): Elementor\Widget_Base->get_stack()#5 /home1/pharmaqa/public_html/wp-content/plugins/elementor/core/files/css/global-css.php(120): Elementor\Controls_Stack->get_controls()#6 / in /home1/pharmaqa/public_html/wp-content/plugins/elementskit-lite/widgets/blog-posts/blog-posts.php on line 1454